Payment & Shipping Terms:
|Size:||96 Wells/48 Wells||Brand:||BT Lab|
|Shipping:||DHL/FedEX||Sample:||Serum,plasma,urine,tissue,cell Culture Supernatant|
elisa assay kit,
elisa reagent kit
High Specificity Human A1BG Sandwich ELISA Kit Customized Alpha-1B-glycoprotein ELISA Kit
Standard Curve Range: 0.05mg/L - 30mg/L
This sandwich elisa kit is for the accurate quantitative detection of Human Alpha-1B-glycoprotein (also known as A1BG) in serum, plasma, cell culture supernates, cell lysates, tissue homogenates.
This sandwich elisa kit is an Enzyme-Linked Immunosorbent Assay (ELISA). The plate has been pre-coated with Human A1BG antibody. A1BG present in the sample is added and binds to antibodies coated on the wells. And then biotinylated Human A1BG Antibody is added and binds to A1BG in the sample. Then Streptavidin-HRP is added and binds to the Biotinylated A1BG antibody. After incubation unbound Streptavidin-HRP is washed away during a washing step. Substrate solution is then added and color develops in proportion to the amount of Human A1BG. The reaction is terminated by addition of acidic stop solution and absorbance is measured at 450 nm.
*This product is for research use only, not for use in diagnosis procedures. It’s highly recommend to read this instruction entirely before use.
|Standard Solution (32mg/L)||0.5ml x1|
|Pre-coated ELISA Plate||12 * 8 well strips x1|
|Standard Diluent||3ml x1|
|Stop Solution||6ml x1|
|Substrate Solution A||6ml x1|
|Substrate Solution B||6ml x1|
|Wash Buffer Concentrate (25x)||20ml x1|
|Biotinylated Human A1BG Antibody||1ml x1|
|Plate Sealer||2 pics|
|Zipper bag||1 pic|
Material Required But Not Supplied
All reagents should be brought to room temperature before use.
Standard Reconstitute the 120μl of the standard (32mg/L) with 120μl of standard diluent to generate a 16mg/L standard stock solution. Allow the standard to sit for 15 mins with gentle agitation prior to making dilutions. Prepare duplicate standard points by serially diluting the standard stock solution (16mg/L) 1:2 with standard diluent to produce 8mg/L, 4mg/L, 2mg/L and 1mg/L solutions. Standard diluent serves as the zero standard(0 mg/L). Any remaining solution should be frozen at -20°C and used within one month. Dilution of standard solutions suggested are as follows:
|16mg/L||Standard No.5||120μl Original Standard + 120μl Standard Diluent|
|8mg/L||Standard No.4||120μl Standard No.5 + 120μl Standard Diluent|
|4mg/L||Standard No.3||120μl Standard No.4 + 120μl Standard Diluent|
|2mg/L||Standard No.2||120μl Standard No.3 + 120μl Standard Diluent|
|1mg/L||Standard No.1||120μl Standard No.2 + 120μl Standard Diluent|
|Standard Concentration||Standard No.5||Standard No.4||Standard No.3||Standard No.2||Standard No.1|
Wash Buffer Dilute 20ml of Wash Buffer Concentrate 25x into deionized or distilled water to yield 500 ml of 1x Wash Buffer. If crystals have formed in the concentrate, mix gently until the crystals have completely dissolved.
1. Prepare all reagents, samples and standards.
2. Add sample and ELISA reagent into each well. Incubate for 1 hour at 37°C.
3. Wash the plate 5 times.
4. Add substrate solution A and B. Incubate for 10 minutes at 37°C.
5. Add stop solution and color develops.
6. Read the OD value within 10 minutes.
Calculation of Result
Construct a standard curve by plotting the average OD for each standard on the vertical (Y) axis against the concentration on the horizontal (X) axis and draw a best fit curve through the points on the graph. These calculations can be best performed with computer-based curve-fitting software and the best fit line can be determined by regression analysis.
Contact Person: Lee