Payment & Shipping Terms:
|Discount:||Available||Delivery:||Within 48 Hours|
|Organism Species:||Human||Assay Time:||2 Hours|
|Standard Curve Range:||0.05ng/ml - 20ng/ml||Sensitivity:||0.024ng/ml|
elisa reagent kit,
Customized Copeptin Human ELISA Test Kit 96 Well Plate Highly Sensitive With Oem Service
This sandwich kit is for the accurate quantitative detection of Human Copeptin (also known as Copeptin) in serum, plasma, cell culture supernates, cell lysates, tissue homogenates.
This sandwich ELISA kit is an Enzyme-Linked Immunosorbent Assay (ELISA). The plate has been pre-coated with Human Copeptin antibody. Copeptin present in the sample is added and binds to antibodies coated on the wells. And then biotinylated Human Copeptin Antibody is added and binds to Copeptin in the sample. Then Streptavidin-HRP is added and binds to the Biotinylated Copeptin antibody. After incubation unbound Streptavidin-HRP is washed away during a washing step. Substrate solution is then added and color develops in proportion to the amount of Human Copeptin. The reaction is terminated by addition of acidic stop solution and absorbance is measured at 450 nm.
Storage: Store the reagents at 2-8°C. For over 6-month storage refer to the expiration date keep it at -20°C. Avoid repeated thaw cycles. If individual reagents are opened it is recommended that the kit be used within 1 month.
*This product is for research use only, not for use in diagnosis procedures. It’s highly recommend to read this instruction entirely before use.
Serum Allow serum to clot for 10-20 minutes at room temperature. Centrifuge at 2000-3000 RPM for 20 minutes.
Plasma Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples for 15 minutes at 2000-3000 RPM at 2 - 8°C within 30 minutes of collection.
Urine Collect by sterile tube. Centrifuge at 2000-3000 RPM for approximately 20 minutes. When collecting pleuroperitoneal fluid and cerebrospinal fluid, please follow the procedures above-mentioned.
Cell Culture Supernatant Collect by sterile tubes when examining secrete components. Centrifuge at 2000-3000 RPM for approximately 20 minutes. Collect the supernatants carefully. When examining the components within the cell, use PBS (pH 7.2-7.4) to dilute cell suspension to the cell concentration of approximately 1 million/ml. Damage cells through repeated freeze-thaw cycles to let out the inside components. Centrifuge at 2000-3000 RPM for approximately 20 minutes.
Tissue and other body fluids Rinse tissues in PBS (pH 7.4) to remove excess blood thoroughly and weigh before homogenization. Mince tissues and homogenize them in PBS (pH7.4) with a glass homogenizer on ice. Thaw at 2-8°C or freeze at -20°C. Centrifuge at 2000-3000 RPM for approximately 20 minutes.
*Sample can't be diluted with this kit. Owing to the the material we use to prepare the kit, the sample matrix interference may falsely depress the specificity and accuracy of the assay.
1. Prepare all reagents, samples and standards.
2. Add sample and ELISA reagent into each well. Incubate for 1 hour at 37°C.
3. Wash the plate 5 times.
4. Add substrate solution A and B. Incubate for 10 minutes at 37°C.
5. Add stop solution and color develops.
6. Read the OD value within 10 minutes.
Contact Person: Lee